[LRD adjustable pipe mounting] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

LRD adjustable pipe mounting
(Click here to view the original thread with full colors/images)

Posted by: 86250rbanshee

I was looking for some pics, anyone have pics of their exhaust and how its mounted right now, I have a DG pipe now its mounted up by the tank. I just want to see how they mount up I will start looking through all the pics of 250r's and see what i can find.

Posted by: atvmxr

I have a way old school LRD pipe from the early 90's, but I think the new ones mount the same. there is a bracket that will hang off either the tank bolt or the head stay bolt

Posted by: elchankoblanko

Yeah it comes off one of the head stay bolts. This pic should help you out

Posted by: 86250rbanshee

Just got my new LRD pipe (used) on the portion of the pipe that attaches to the cylinder the one I got only has one little tab for a spring to mount to the flange. But on the pipe there isnt a spot where its broken off or rusted oranything. Pipe is in very good condition.

Need some pics of that

Posted by: 86250rbanshee

What all needs to be taken off to put on the LRD adjustable? I know nerf bars and probably front tire but what about a-rms?

Thanks

Posted by: Aceman

Take the pipe apart at the joint. Clean it up really good with a wire wheel/die grinder. Install the half of the pipe onto the cylinder. Then smear some high temp silicone on the inside of the other half. Install it over the first half and tighten the bolts down. I never had to remove my arms or tires.