[needing help with change of axle] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

needing help with change of axle
(Click here to view the original thread with full colors/images)

Posted by: QuadJunkies

We have an axle and are not sure whos axle it is?

It fits the E-ton bearing Carrier,the rotor hub is the right spline and fits.... BUT.. the sprocket hub is a different spline.

the E-ton vipers sprocket hub is FLAT with a spacer behind it that goes into the seals.

the Kasea spocket hub fits the splines on the NEW axle,and has a built in spacer that goesnt intpo the seals,but allows about 1/2 inch of play in the axle-Hub is TOO NARROW/TOO THIN

The axle may have been off an Apex, but we have no real clue.

Heres some pictures. If not, Il talk ot Rich about it tomorrow.

Posted by: QuadJunkies

Eton

Posted by: QuadJunkies

Kasea

Posted by: kasea90cc

for sure not apex, because we have one, maybe an drx.

Posted by: markvette

it is an eton axle. i have the same axle on bubba's viper. it will not fit the kasea. it will fit the eton. the sprocket hub fits VERY tight. i had to use a rubber mallet to get it on.

Mark

Posted by: QuadJunkies

quote:
Originally posted by markvette
it is an eton axle. i have the same axle on bubba's viper. it will not fit the kasea. it will fit the eton. the sprocket hub fits VERY tight. i had to use a rubber mallet to get it on.

Mark

Troy used alot of force to put it on and wouldnt budge. Hes tried even with a hammer to it which he didnt like to do .....

tried a mallet wouldnt go on ...He said he will check the splines again.
Thanks

Posted by: jetmedic

I have this axle and I had to use a hyd press to get the sprocket hub on. but it works well. My son has bent one of these as well just from racing and jumping.

Posted by: QuadJunkies

quote:
Originally posted by jetmedic
I have this axle and I had to use a hyd press to get the sprocket hub on. but it works well. My son has bent one of these as well just from racing and jumping.

Thanks for the info