[Dust seals] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

Dust seals
(Click here to view the original thread with full colors/images)

Posted by: RideRed400EX

Can someone tell me how to remove the dust seals from the stock a-arms and bearing carrier? These things are driving me INSANE

Posted by: RideRed400EX

So nobody know how to remove these dust seals...

Posted by: ChadEXer

Use a flat screwdriver!!!

Posted by: Ben

Yes I use a flat screw driver to remove the a-arm dust seals - but be careful you don't gouge them too much beyond repair. I did the first time I removed the dust seals because I got ticked off and used to much force. Steady pressure is the key. There is probably another method but this works great for me. Let us know how is works out for you.

Posted by: RideRed400EX

It worked fine but I destroyed the seals for the bearing carrier. Which sucked because I planned to save the seals and replace the bearings. LIve and Learn...

Posted by: RiPPiNiTuP7

Ah, it would have been a good idea to change the seals anyways..its cheap insuarance

Posted by: lil400exman

good point and use marine trailer grease too!!!!!it wrks the best it blue and stuf use anit seize too!