[Kill Switch as a starter button..need answer quick!!] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

Kill Switch as a starter button..need answer quick!!
(Click here to view the original thread with full colors/images)

Posted by: ST87

when using a dirt bike kill switch button as a starter is there any certain bike switch that you have to get or will any switch work

Posted by: TTZ450

YOU NEED TO KNOW IF THE SWITCH YOU ARE USING IS N/O OR N/C..

Posted by: ST87

how do you find this out before buying one

Posted by: AL Elks

You call the company selling it and ask them.

Posted by: ST87

which one do i need n/o or n/c

Posted by: LTandRaptorider

Hmmm... Let's see... A kill switch/ off button using as an ignition start button. Pushing the button would complete the circuit, or closing it, to start the quad. So the button out, the circuit would be normally open. Which is what you want when using the bike kill switch as a start. So normally open, I would think is what you want. Someone please correct me if I am wrong. Now don't confuse this with a tether kill switch, in which normally closed is best for the LTR.

Posted by: allstock

i used the yamaha one for my 400

Posted by: ST87

Yeap thats what im doin right there

Posted by: armoks

look for a push button kill for a KX250 they work the same. just connect the orang wires together then take the yellow/w black and hook it up to one of the wires to the kill and the black wire to the other.

Posted by: Baracudaaa

I used the CR Kill switch for my starter, works like a charm. Be careful though, if you wire it up backwards, the starter will keep cranking after the bike starts.