[Typhoon 90] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

Typhoon 90
(Click here to view the original thread with full colors/images)

Posted by: MJM442

We just got our Typhoon 90 two days ago and does anyone know the easy way to install the pin to get fourth gear? It looks as though you have to remove the clutch and drive gear to get to the cog wheel where you install the pin. If I am making this to difficult any help would be appreciated. Also the bike stumbles if you mash on the gas from a dead stop. It doesn't seam as bad if you are moving I am not sure if this is jetting or needle clip position or what. Other than these two issues and the left heal gaurd I think you get alot of machine for the money. Dual a-arms and shocks for our kasea are almost as much as we paid for the whole machine.

Posted by: markvette

you really need to get your dealer to istalll the 4th gear. not real hard but not real easy either, you also have to have a special tool to take off the clutch hub. if you get the tool and want to try it yourself i'll try to walk you through it, i have done 3 so far.

Mark

Posted by: MJM442

Where do you get tool to remove hub? Would like to try to do all of the work myself and learn as I go.

Posted by: markvette

here is a link to where you can get the tool.

http://us.st11.yimg.com/us.st.yimg....0_1915_27449401

Posted by: MJM442

Any idea about the carb stumble?

Posted by: whitenight2

I just picked my 90 up today for my son. They told me the carb is to big. They are making a change to a smaller one. That is why it spotters untill you get the rpm's up. Thats what I was told

Posted by: markvette

yes xtreme is sending out smaller carbs for the 90's. it makes a big difference.

Mark

Posted by: whitenight2

where do i get the jets for the typhoon 90 and witch do i get so it will run right my son wants to hit the gas and go like right now any help would be nice thanks .taking it to the track like it is for now