[Adjusting shift lever on a honda 300ex] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

Adjusting shift lever on a honda 300ex
(Click here to view the original thread with full colors/images)

Posted by: rebelbuggy

I have a question how do you guys adjust your shift levers on the 300ex for your boots... I went to ride and found out my lever needs to go up but on the 300 if you move it from the stock location it hits the case so do you guys get aftermarket ones that are bent out? or do you bend the stock ones out cause it would need to go about half a inch to clear the case...

If you bend them how do you do it? do you heat it first or what thanks if anyone can answer this

Posted by: Sjorge300EX

just move the box too. Then you dont have to bend anything

Posted by: Tri-valleyracin

Grab it and pull it and then un bolt it and move it to were you want, its that easy. I dont think theres any aftermarket shifters for the 300ex.

Posted by: rebelbuggy

quote:
Originally posted by Sjorge300EX
just move the box too. Then you dont have to bend anything

ha ha yeah I'm going to move the side of the motor case

I noticed on my buddys 400ex the case is made with the case pushed back where the lever goes. so you dont have to worry about it hitting.

Posted by: rebelbuggy

quote:
Originally posted by Tri-valleyracin
Grab it and pull it and then un bolt it and move it to were you want, its that easy. I dont think theres any aftermarket shifters for the 300ex.

oh.. Alright

Posted by: Sjorge300EX

i was thinking clutch lever. I think moose makes a after market shifter that brings it out more

Posted by: rebelbuggy

quote:
Originally posted by Sjorge300EX
i was thinking clutch lever. I think moose makes a after market shifter that brings it out more

oh sorry about the confusiion

Posted by: bwamos

I just bent mine out.

Posted by: TJCamro

I used an MSR YZ250F shifter on mine, works pretty good.