[Installing kill switch] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

Installing kill switch
(Click here to view the original thread with full colors/images)

Posted by: JJs450r

well i been workin on it the past 2 hours, i got it connected to the right wire to kill it, im not sure if i have a good ground on it or not, can anyone help me out here?

Posted by: DirtDevilBT

I used a dremel to clean off the paint where the headlights mount to the frame. The bolt right there where you already spliced. Then wrap wire around bolt and tighten.

Posted by: JJs450r

so u filed the black pain from the bracket? haha just wonderin cus im dumb when it come to electrical stuff

Posted by: Phills450r

quote:
Originally posted by DirtDevilBT
I used a dremel to clean off the paint where the headlights mount to the frame. The bolt right there where you already spliced. Then wrap wire around bolt and tighten.

thats where we had it connected but we didn't scrape the paint off of it? could this be our problem?

also we have it connected to the green wire coming out of the ON/OFF & Light Switch box.. then that wire runs into 2 green wires.. are we in the correct place?

Posted by: 450R_lover

i spliced into the black wire with the white tracer that comes out of the kill switch for my hot wire. Then i scraped off some of my powder coat where a bolt contacts the frame, up front under the hood. Then wraped the ground wire around it and tightened it down. Mine works!

Posted by: Phills450r

so the black wire.. hmm there was 2 wires coming out of the on/off part of the black box and we went into the green one.. guess we will try the black one tonight.. gotta have the kill switch on to race at the track we are going to sunday

Posted by: DirtDevilBT

black with white tracer

Posted by: Chino886

quote:
Originally posted by 450R_lover
i spliced into the black wire with the white tracer that comes out of the kill switch for my hot wire. Then i scraped off some of my powder coat where a bolt contacts the frame, up front under the hood. Then wraped the ground wire around it and tightened it down. Mine works!

same here, did it in 15 mins....works fine!

Posted by: Phills450r

yea thats what it was.. we went into the green wire.. im horrible at wiring stuff so :/ but it works now

thanks for the help