[my friends z wont crank] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

my friends z wont crank
(Click here to view the original thread with full colors/images)

Posted by: xcracer416

ok, i work on all my own quads and i am a mechanic at a dodge dealership. i need all of yalls help on this. me and my buddy went riding saturday and when we got through we pulled to the side of my house and washed our quads once they got cool . he has an 05 z400 stock except for an hmf exhaust and jetted by the dealership. he had the exhaust put on when he bought it new. the quads got about 50 hours on it never gave a problem until now. after we both washed our quads we rode them around my yard easily since i live in town. it ran like normal, then we both parked in my car port so i could change my oil and go over mine. when he went to load his up it wouldnt crank. its getting gas,plenty of spark, new spark plug, plenty of compression. it acts like fuel isnt getting to the cylinder through the carb. i pulled the fuel line off and turned it over and it was flowing plenty of gas out. then i tried a no no to get it to start. i took the air filter out and shot i small amount of starting fluid into the air box. it still didnt crank, so now im out of options and need some help so i can get it running and he can ride again. what else is there on a z to check out?

Posted by: yellowzo3

it wont crank?... then how do you know its getting spark...you have to crank it to see if theres a spark...maybe his carb is dirty or you got some dirty gas in there.

Posted by: xcracer416

it guess when i meant it wont crank i meant start. southern vocabulary huh? if the carb was dirty it should have tried yo start with the small amount of starting fluid i sprayed in the air box. i used another spark plug and put it in the cap and held it against the head pipe to ground the spark plug to see the fire.

Posted by: yellowzo3

thats weird it should start...hope its not something internal...you didnt get water or anything in it when you were washing it right? if you used a pressure washer maybe some got in there

Posted by: xcracer416

i thought it should at least hit on the starting fluid. we used a water hose with a pistol nozzle on it

Posted by: yellowzo3

are all of your grounds tight on the quad

Posted by: xcracer416

went over all of them, they are good. i dunno what has happened to the thing. ive been around quads my whole life and never seen this happen

Posted by: Byte

Check to make sure the choke isn't sticking.

Posted by: brapbrap13

hope this will help.
i had a problem like this after a rebuild(i started to break the quad in about 3hrs on it), my quad had everything fuel spark compresson timming was perfect. wat i had to do was take the plug out poor a little gas in the cylinder then it fired up and i have never had the problem again.