[Homegrown propegs] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

Homegrown propegs
(Click here to view the original thread with full colors/images)

Posted by: patches85

Whipped these up this afternoon

Posted by: patches85

Another

Posted by: WILSONatv

cool do they work good

Posted by: exrider008

those look great nice job. if i were u i would make a few and sell them on ebay.

Posted by: patches85

Yeah they work great! And I thought about the e-bay thing.

Posted by: Scro

quote:
Originally posted by patches85
Yeah they work great! And I thought about the e-bay thing.

Just make sure you do some testing first. A footpeg breaking that you made could be a major liability issue.

Posted by: patches85

quote:
Originally posted by bama450r
Just make sure you do some testing first. A footpeg breaking that you made could be a major liability issue.

I didn't change the mounts. I just cut the mount off another set and then split the rest down the middle. Then I welded a half to each side of the stock footpeg.

Posted by: Scro

Ohhh, I see. I was thinking that they were made from scratch. Nice work

Posted by: wanta450

put some kickups on them yet

Posted by: patches85

Not yet! Man I am so busy!

Posted by: kyleschonert

sharpen those bad boys and then you will be set. I did that to my stock pegs and didnt even add another one and could tell a MAJOR diff.

Posted by: patches85

Went riding in a quarry tonight and these pegs rock!!!