[440 not running right] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

440 not running right
(Click here to view the original thread with full colors/images)

Posted by: stc416rider

im not really sure but my 440 is not pullin like i thought it would i was thinkin of a new 14 tooth front sprocket but im kinda dissipointed

Posted by: 2004exrider

I'd first suggest checking the spark plug to make sure that your jetting is dead on or atleast close then go on from there. Then also change your exhaust, even if its a slip on its gonna be better than a "modified" stocker and then get a cam if you already didnt.

Jimmy

Posted by: Joe400ex

quote:
Originally posted by 2004exrider
I'd first suggest checking the spark plug to make sure that your jetting is dead on or atleast close then go on from there. Then also change your exhaust, even if its a slip on its gonna be better than a "modified" stocker and then get a cam if you already didnt.

Jimmy

Posted by: dragracer101

YA, its def. the jetting

Posted by: stc416rider

its not a modded stocker sry i got a new quad and i havent got around to changin my sig yet its a white bros

Posted by: psycafunkapus

it might be the stock cluch too....had the same problem....yeah it was fine startin off but after a second or two there just didnt seem like it wasnt there....well good luck

Posted by: evileyesracing

It is not your jetting, jetting is easy to tell when its bad it will fowl spark plugs. It is 100% sure your clutch, I had the same problem with my 460ex it would not have to low end power I wanted it was all top end so I ordered a Hinson Dirt Digger Clutch with heavy duty springs and a Hinson clutch basket and It was all the low end power I wanted