[How to remove plastic body panel rivets] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

How to remove plastic body panel rivets
(Click here to view the original thread with full colors/images)

Posted by: mc1984

I want to pull the body work off my KFZ400. I was wondering what is the best way to do this. Do I have to pop out all the plastic rivets? Or can I pull it off with more than 1 section intact? How do I get those plastic rivets out? I am afraid to pry on them with a screw driver. Thanks in advance!

Posted by: YFZ450Ridr

just push the centers of them in with a screw driver and then they should come off really easy. thier way better than the honda plastic clips because you can reuse them.

Posted by: s281sc

Taking off you're plastics is pretty simple just pop the middle of the rivet down and they come right out thats all there is too it... as far as everything else ( I havent done this in a while) I believe you have to take the two bolts that hold the headlight out, undo the clip on the back of the light, disconnect the battery, just all the obvious stuff.... I hope this helps ya out, oh and if ya do happen to loose one of the plastic rivets.. big zip tys always make a good replacment

Posted by: z400roosteR

just place your two fingers on the outside of the rivot(outside of the center on the rim) and pop out the bottom with your finger...Easy!

Posted by: mc1984

Thanks guys! Youre right they are easy. I thought they had to pry out. I was able to take off the whole front end in one piece

Posted by: exrider23

You can re-use the honds clips too...i take my plastic on and off all the time and have no trouble usin the honda clips again..

Posted by: speedyquad

quote:
Originally posted by exrider23
You can re-use the honds clips too...i take my plastic on and off all the time and have no trouble usin the honda clips again..

what he said...mine come off after every ride...still have the originals in