[what next?] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

what next?
(Click here to view the original thread with full colors/images)

Posted by: clewis1303

was up guys i got a 2003 kfx400 with procircuit slip on ac nerf bars shock covers..i dont got much money but anything essential i need that i dont have ?

Posted by: wreckdiver

A aftermarket swingarm plate was first on my list, PRM .250 cannot be beat IMO. Belly skid needs attention too. You really need to protect your underside.

Posted by: IrideMHSC

Yea skids are important if your doing any type of agressive trail riding. one rock to the case can leave you without oil and in a bg hurt... then i would go with tires and that sort of thing if your on much of a budget

Posted by: indyZrider

i love my armadillo skids!

Posted by: fast_enough

quote:
Originally posted by clewis1303
was up guys i got a 2003 kfx400 with procircuit slip on ac nerf bars shock covers..i dont got much money but anything essential i need that i dont have ?

Are you jetted? Cheap and very essential, also, I would go for a K&N filter. Rear tires after all that would be my next choice

Posted by: Bobbo

skids for the protection

Posted by: djeurink

Yes a K&N will boost the power but if you ride any where its dusty or sandy it will let sand into your motor. it trashed my z400. if you do get one recharge it after EVERY ride.

Posted by: wreckdiver

quote:
Originally posted by djeurink
Yes a K&N will boost the power but if you ride any where its dusty or sandy it will let sand into your motor. it trashed my z400. if you do get one recharge it after EVERY ride.

Would bet the K&N was not at fault, not trying to be a prick but they handle dust and dirt as good or better than any filter I have seen. Please don't give bad advice either, K&N says they work better a little dirty, and not to clean them too often.