[Question] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

Question
(Click here to view the original thread with full colors/images)

Posted by: pastfast125

I know it's been posted before, but I'm still a little confused on how to completely drain all the old coolant out of the system? Also, when filling up with new coolant, do you fill the radiator to the top, and then also fill that rezzy under the front left fender? Thanks

Posted by: HondaRider250

first drain all the coolant outta the engine by taking out the sliver screw on the water pump cover. this is a drain plug and will drain all the coolant. then drain the resevoir. fill the radiator w/new coolant by taking the radiator cap off and filling the radiator to the top with new coolant. then fill the overflow resevoir and run to temp

Posted by: pastfast125

cool thanks. I found out the hard way, that if you are changing your oil AND coolant at the same time, do the coolant first. I put it new oil. Then I take off the water pump cover to clean out any gunk and corrosion mess that built up, and all my fresh oil came out of a drain plug peice that connects between the 2. woops

Is the only place to get the evans coolant from they're website??

Posted by: HondaRider250

nope, there are dealers in the US that sell evans. theres not many of them, u will have to call evans and ask for one near you, i bought mine from a place in illinois. also, dont order npg-r. its on backorder and u wont get it for another month or two. get npg+