[bar risers] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

bar risers
(Click here to view the original thread with full colors/images)

Posted by: coolex

is there any way to raise my handle bars because i have a 2003 250ex and im getting to tall for it and i cnt get a new quad to i need the handle bars to be higher up and i cannot find a taller sterring stem for a 250ex so i was wondering do the sell bar risers like they do for snow mobiles and i have the stock handle bars

Posted by: MossboysRacing

"Rox" risers... they make block risers, anti vibe risers,and all kinds of stuff that can help. speedfx.com is there web site.

Posted by: coolex

thanx but will it work for four wheelers to basically im asking if the have the same size bar i thinks its 7/8 but thanks thats a big help

Posted by: ontarioracer#33

yes they both are the same size bar. what i did when i got to tall for my 300ex is i had a profesional welder cut my stock stem and weld in an extra inch. you might also want to try a different bar bend find a taller one or one with less sweep in it. also before you go wild raiseing your bars make sure that you have enough cable to do so.

Posted by: MossboysRacing

Rox makes risers just for Quads also...you can go 2 inches taller, 7/8 to 7/8 or 2 inches taller 7/8 to 1 1/8 they have all kinds of stuff for quads... check them out, you will not be disappointed.
I run a 2 inch riser on my 250x, and it allows me to move the bars up and foward. On a stock clamp, you can only rotate the bars.

Posted by: gotwarrior

has anyone tried the anti vibe risers.. I wondering if they were worth the money or not..

Posted by: TWISTED DINLI

just get a 450r and you will solve everything.