[starter one way bearing] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs
Pages:1


starter one way bearing

(Click here to view the original thread with full colors/images)


Posted by: hellrazors05

ok guys i am pretty sure i am getting a 03 dale canninbal but it needs a starter one way bearing how hard is this to put in i have mechanical ability and work in a machine shop. this quad supposidly has all the upgrades done to it and stage 8 kit. so whats involved and is there an easy vs hard way proper vs stupid way. any help would be great. thanks Eric also what does this part cost and were can i get it


Posted by: iceracer17

The one way requires pulling the motor and getting the crank plate out.If you are mechanically inclined and have a manual(whch can be found at c-dale riders) it's not to bad to do.Then you can check the rod bearing while it's apart.I think the bearing is around $35 at www.blackwidowatv.com




vBulletin Copyright ©2000 - 2003, Jelsoft Enterprises Limited.
vB Easy Archive Final - Created by Xenon and modified/released by Adam J. de Jaray