[This has probly been asked alot] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

This has probly been asked alot
(Click here to view the original thread with full colors/images)

Posted by: MAD450r

Will my 400ex's lonestar +2 arms and elka's fit a 250r and work properly?
Also will the rear shock work as well as the +4 lonestar axle. A guy wanted to trade for my 416ex, but his has stock suspension. i'd consider the trade if all my components will fit and work ok.

Posted by: Dave83

The a arms will work,but you need to put spacers on each side of the pivot bushings.The EX arm is about 1/4" narrower at the pivots.Shocks will work great,axle will work,but you would need the EX hubs to go with it.Ive seen R rear shocks on ex linkages with some mods to the linkage bushings.

Posted by: MAD450r

I'll have to talk to the guy again. Then get both atv's together and see if we can swap out my aftermarket setup, for his stock setup.

His motor rips its got alot into it. He just never did suspension.

Posted by: MAD450r

bump

Posted by: Dave83

To put the R arms on the EX youll have to trim the mounts on the arms to get them to fit the frame mounts on the 400.