[Swingarm pivot bolt] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

Swingarm pivot bolt
(Click here to view the original thread with full colors/images)

Posted by: brentm

Can the swingarm pivot bolt on a 2002 Honda EX400 be removed for lubrication without removing other items first - i.e. rear axle, etc.? Other threads have recommended frequent removal and lubrication to avoid bolt freezing in frame.

Posted by: Pappy

you may have to remove your rear brake lever, but thats it.

good luck!

Posted by: sickmojave

quote:
Originally posted by Pappy
you may have to remove your rear brake lever, but thats it.

good luck!

you only need to remove the brake spring..

Posted by: 300ex mxracer

all you have to do is unhook the brake pedal from the master cylinder (a little clip) and take the nut off the left side.

Posted by: sickmojave

quote:
Originally posted by 300ex mxracer
all you have to do is unhook the brake pedal from the master cylinder (a little clip) and take the nut off the left side.

that may be on your 300 but not on the 400.. all you have to remove is the spring....

Posted by: 300ex mxracer

o oki wasnt paying attention to what quad this was.