[I Need Help!] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

I Need Help!
(Click here to view the original thread with full colors/images)

Posted by: exracer330

hows it going guys i need some help big time...ima bout to get some 20 inch holeshots for the back and 21 i think for the front of my 300. my questions is i have a 14 tooth up front and right now im beatin a bored out blaster and i have 22 razars on the back, when i get these tires i want to now if im going to loose any power or top speed...i just need to no becuase i hate the 22's THERE HUGE!!!! thanks guys have a goode one....

Posted by: yellow400ex05

If you get 20 inch tires you will lose some topend, When I had my gigantic 22 inch tires on my 250ex I was going 53 topped out, and then i switched to 20 inch maxxis razrs I'm going like 47 mph.

So yes you will lose some tope end, but IMO don't get 20 holeshots, because they wear down too fast, either get 20 kenda klaws xc Kenda Gnarly's or What I have which is 20 Maxxis razrs, BTW I love my maxxis razrs they hook up insanly good.

You won't lose power except topend and when you have the 20 inch tires you will get more lowend for acceleration.

Posted by: Sjorge300EX

I have 20" holeshots on my 300ex, and I really need to change my gearing to make up for the size. Im probaly going to switch the rear spocket to a 36, that will help alot.

Posted by: 300exOH

I have 20" knarly's on my 300 w/stock gearing and I lost a couple mph on the top end but the acceleration is great. It depends on where you need the power. I ride trails so I really like the low end power. On long straights like fire roads/open fields the blaster will probably pull ahead but in the woods they should be very close.