[blaster airbox help] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

blaster airbox help
(Click here to view the original thread with full colors/images)

Posted by: newcastle915

how do you blaster guys have your airboxes sealed up my buddy has his lid on with a couple holes in the back and hes getting all kind of crap in his carb but on my 450 i go through water up to the seat and nothing in mine with no lid at all

Posted by: bradley300

does he have the snorkel on the air box still? if not, you need to run a few pieces of duct tape from one side of the plastic, under the hole for the snorkel and attach it to the other side. also make sure you take out the drain plug so if water gets in the airbox it has a quick way out

Posted by: newcastle915

what do you mean with the duct tape and the drain plug is out could he be sucking stuff through the vent tube on the carb cuz he was actually getting dirt in the slide and making it stick

Posted by: bradley300

first make sure he has all the hoses on the carb.

stretch a few pices of duct tape across the frame in front of the air box. there is a big hole on the front of the airbox lid where the snorkel mounts. just make sure the duct tape goes under that, you'll see what i mean when you look at it. this keep water from splashing up into the airbox. also, tape off the hole where the oil injection filler cap was if he's taken off the oil injection

Posted by: Acello

can you just tkae off the snorkel and just have the air box lid still on and be okay.

Posted by: bradley300

yeah, you can take just the snorkel off and get a little more air, you should have to go up one main jet size