[CDI mounting] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

CDI mounting
(Click here to view the original thread with full colors/images)

Posted by: D Bergstrom

I just purchased a 86 250r a couple of weeks ago. The question I have is the guy that had it has the regulator zip tied to the CDI box, and the CDI zip tied to the frame. I know they should have rubber mounts that hold them to the frame, where do the regulator and CDI mount with these rubber mounts? Does anyone have a picture "under the hood" of there R that shows where these mount? I just don't like the zip ty method and would rather have them rubber mounted.

Thanks,

Doug

Posted by: Dave83

he cdi mounts above the left side of the radiator on the barb that goes towards the steering stem.I may have the rubber holder here,Ill check and see.

Posted by: Rich250RRacer

On an 86, the regulator is mounted to a metal tab on the air intake. If you have no metal tab on this tube, somebody may have replaced the tube with one from a newer quad.