[03 steering stem] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

03 steering stem
(Click here to view the original thread with full colors/images)

Posted by: otis

I just purchased an 03 cannibal and the top of the steering stem hits the plastic covering the tank when I turn it. I am assuming that this is not normal. It looks as if it has been changed. Could someone post a picture of what the original looks like?
Thanks.

Posted by: FUTheman

if you are a new owner you will want to check out www.cannondaleriders.com to find out answers to your questions.

Posted by: armoks

02 stem dosn't have a bracket for a stabilizer and the top mopunt came strait up off the angled stem. the 03 stems had a tab for a stabilizer down low and the mount was inline with the angle of the stem.

Posted by: armoks

heres a great explination of whats different

http://www.cannondaleriders.com/vbb...&highlight=stem

Posted by: otis

I figured it out. I have an 03 stem. The lower stem mount had been cobled with a couple of bearing flanges and bearing from a farm store or something. Got the new part this afternoon . Put it on and it pushed the stem up almost an inch. Turns a lot easier also. Thanks for the help.