[450r jet ?] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

450r jet ?
(Click here to view the original thread with full colors/images)

Posted by: 250xcheetah

ive got a 450r with a baldwin exhaust and other than that its stock. so what jet should use.

Posted by: redlined94

open box, filter, full or slip on?????

Posted by: 250xcheetah

its a full system, a stock filter, and air box lid on.

Posted by: 450ss

well call the company and they will point you in the right direction and they will probally tell you to jet it without the airlid on or just cut the back half of the lid out to simulate the hrc lid but I am guessing that you will be at about 178 or 180 main jet , just start high on the jet and work your way down in sizes

Posted by: JRP

quote:
Originally posted by 450ss
well call the company and they will point you in the right direction and they will probally tell you to jet it without the airlid on or just cut the back half of the lid out to simulate the hrc lid but I am guessing that you will be at about 178 or 180 main jet , just start high on the jet and work your way down in sizes

yea call the company and they should tell you what jets to use.

Posted by: redlined94

I would take the lid off, get a UNI filter and then rejet it. You will get the best power gain like that. With all that like 450ss said it will be around 170-185 with the lid off and stuff. I got a dynojet kit and it told me what to put it and it was dead on after that so I would suggest one of those.