[Wiring removal] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

Wiring removal
(Click here to view the original thread with full colors/images)

Posted by: motox450

Hello everyone. I am thinking of totally removing all excess wires from my quad. I am putting on a crf kill switch to remove the kill switch/light cluster, have removed the front and rear brake light switches, and removed the brake light, headlight cluster. Now the only way to totally remove all of the wiring that goes with those plugs I believe I have to spice the black tape from that huge wiring harness that goes down the center of the frame. Has anyone done this or attempted this before. I know this seems overkill, but I like it to be as clean as absolutely positive. Any info would be great.

Thanks,
Russ

Posted by: Mxracer53

Just so you now you have to have a another hotstart or you cant take the killswitch light box off.

Posted by: motox450

I have an ASV lever with hotstart. I am using the stock hotstart cable off of my fcr carb.

Posted by: Mxracer53

ok good luck

Posted by: the yazer

i ran my 450r with out the hot start for a while . you dont really need the hot start

but it sure is nice to have back thanks to works connection