[GNC pros and the swingarms.] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

GNC pros and the swingarms.
(Click here to view the original thread with full colors/images)

Posted by: kyleschonert

I have been looking at alot of the pictures from the GNC series and on pictures from this site and from magazines, I have nticed that a few of the Yamaha riders are still using there stock swing arms. SUch as Kory Ellis, and Pat Brown and more. Why are they still using the stocker, with Kory on a factory ride and a sponsorship at Alba, wouldnt he be using one of theirs? I donno, I just thought that was weird to see that.

Posted by: ThumPIN_450R

with Ellis being a factory rider he is probably testing prototypes and such or he may just like the stock swinger

Posted by: woodside83

they made a great swinger for 04 and now they have made it stronger for 05, lost creek cycles also use the stocker, Bill ballance uses it to

Posted by: Shawn H

Bill uses it cause Yamaha wants him too! At least thats what he told me at the 12hrs last year.Also they are lighter!!! Maybe theres more to it idk?

They also get them for free when they do break them.

Posted by: z03n05

Yeah, I asked Kory at Birch Creek about using them and he said they are stronger now and that they were lighter.

Posted by: jgfarmsracer

quote:
Originally posted by snowgasm
Bill uses it cause Yamaha wants him too! At least thats what he told me at the 12hrs last year.Also they are lighter!!! Maybe theres more to it idk?

They also get them for free when they do break them.

yes but they had a Lonestar Arm for the 12 hr

Stockers are junk

Posted by: FoxRacing81

Most of the Yamaha guys run the stock one on there 05s because they are stronger then 04. Bill Ballance even runs a stock axle!

Posted by: bradley300

quote:
Originally posted by jgfarmsracer
yes but they had a Lonestar Arm for the 12 hr

Stockers are junk

they may have run it just for the 12 hour since it is such a long race. and johnny gallager is sponserd by LSR which i would assume is why they used an LSR one

Posted by: bbrad mulvey

Ive talk ed to a few poeple about that and they(swing arm companies) have all said that Yamaha hit it right on the nose with theie design and durabilty. The only thing that is week about the rear end is the carrier. They said one that goes them you see them being replaced. But even then that is still tough. But it is also a lot lighter than the after market companies at least JD performance. But JD's is also the strongest swing arm that money can buy...

Posted by: Shawn H

quote:
Originally posted by jgfarmsracer
yes but they had a Lonestar Arm for the 12 hr

Stockers are junk

And thats cuz the stocker would never made it thru 12hrs.you should know that didnt you break 2 of them

He told me they last about 1 race

Posted by: jgfarmsracer

ya we broke two of them

mine had six xc races and very little practic time and in 4 hrs of that race it was commin' apart

Then the other one had about 9 xc races it came apart in three laps

both cracked above linkage mount and on left side by the chain tension bolt!!!!

last one finished the race and is in the corner of a shop somewhere!!!!

Posted by: Johnny & Monica

We broke my stock swingarm at the 12 hour race also,An put a rpm swingarm on it an broke it also

Cured the problem by buying a Honda

Posted by: jgfarmsracer

quote:
Originally posted by snowgasm
And thats cuz the stocker would never made it thru 12hrs.you should know that didnt you break 2 of them

He told me they last about 1 race

cost us a top 3 finish too!!!!!!!!!!!!!!!!!!!!