[IMS Pegs] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

IMS Pegs
(Click here to view the original thread with full colors/images)

Posted by: ChuckSpears825

IMS make pegs that are an inch lower than normal. The downside is that I haven't seen nerf bars that will work with the pegs.

Posted by: Bunkerking217

The AC's should, if not, I'd call IMS.

Posted by: 1iviper

i think they are only a half or 3/4" down and back but i'm not sure.ac's work no problem.the pegs are nice,like having platforms to stand on.also notice the last part of the peg is staggered so your boot heel kinda locks into it.and if you like to throw it around definatly get the kick ups.
http://img.photobucket.com/albums/v619/1iviper/roll-master.jpg

Posted by: woodside83

i have them they will boult up to just abount any nurfs out there that are not pro pegs

Posted by: ChuckSpears825

Viper, the pegs you have are the standard IMS Pegs. IMS has a set the sits 1" lower than the standard. That's where there's a problem with the nerfs.

Posted by: jr1975atv

No problem with them and the ac nerfs mine bolted up fine i9 used longer bolts and kept the stock heel guards looks ok.