[cutting fenders] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

cutting fenders
(Click here to view the original thread with full colors/images)

Posted by: ES400ex

whats the best way to cut back your front fenders?

Posted by: 44oEX

use a non permarnante marker and make a line where you want to cut it. make sure you like it. then take a grinder and cut. make sure to make it a little bigger to fix any mess you might make with the grinder. then the second time around cut it to final size.

Posted by: redrider4ex

Dont use a grinder, try to get ahold of a dremel tool, or some type of handheld rotary saw, much more reliable cut

Posted by: mx400

I used a knife, sand paper, and a good steady hand.

Posted by: 300ex73

I just used a dry erase marker and a jigsaw.

Posted by: awsomeaussies

or a hacksaw

Posted by: Nick110

i used a hacksaw then dry sanded, then wet sanded, and i took a torch to it to get the gloss fisnish back

Posted by: Yoshi18

Tin snips worked fine for me.

Posted by: Warnerade

quote:
Originally posted by Yoshi18
Tin snips worked fine for me.

Posted by: Quiksilver01

i put tape down in the design i wanted. then cut it with a regular hand saw and filed the ruf spots then sanded the whole thing

Posted by: NacsMXer

I used a Rotozip and electrical tape for my front and rear fenders. 16,000 rpm's and very controllable

Posted by: wboy62417

i used a grinder for mine

Posted by: RRP

electric tape,sawsall,sandpaper,torch

Posted by: bud660r

I USED TAPE AND A RAZOR BLADE WORKED REALLY GOOD FOR