[what lugnuts are you guys with hipers using?] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

what lugnuts are you guys with hipers using?
(Click here to view the original thread with full colors/images)

Posted by: turboTony

My buddy just picked up a set of hipers and when using the stock lugnuts, can't get a socket on them cause the hole is to small.
Is there a smaller set of lugnuts he should be using and where can we get them ?

Posted by: dirtriderex

I just turn the stock lugnuts around and screw it in with a 3/8" ratchet

Posted by: turboTony

he turned them around but couldn't get a socket in there.

I haven't been over there yet to check them out.

Posted by: dirtriderex

what? You can get a socket in. I do it all the time

Posted by: redriderex

i went over and fixed his problem,he is all set

Posted by: bradley300

you can use the stock nuts for a blaster, they are only 14 mm instead of 17 and they have a washer on them also

Posted by: turboTony

quote:
Originally posted by redriderex
i went over and fixed his problem,he is all set

Now what about the exaust situation? Are we riding on Sunday? I'm going to throw my machine back together Saturday.

Posted by: Out_Sider

quote:
Originally posted by bradley300
you can use the stock nuts for a blaster, they are only 14 mm instead of 17 and they have a washer on them also

these are the ones i use for all my aftermarket wheels

Posted by: CdaleXtreme

The lug nuts off of a 2004 Suzuki Twin Peaks.

Perfect 17 MM flange nut for all non-tapered Lug Nut applications.

Posted by: brandonpeake

i use cannondale lugnuts that i got from
jeff, The Quad Shop

Posted by: jeepnrocks

I have a friend that just used the stock lugs and put a washer behind them. never had any problems.
on my t-9s i just turned the lug upside down. no problems that way either

Posted by: atvrider12764

im just using the stock lugnuts on mine without a washer, why arnt you suppose to use the stock ones?