[white plastic??] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

white plastic??
(Click here to view the original thread with full colors/images)

Posted by: -=Skot=-

any one know how to get filthy,dirty stained white plastic to look white again?

Posted by: -=Skot=-

would engine degreaser hurt it?

Posted by: Sparkles

try some w d40

Posted by: barbwire44

My buddy used 800 grit paper then 1000 then 1200 finished wet sanding with 1500 and then buffed her out with zymoil wax looked good but i wouldn't do it, to much elbow grease and time.

Posted by: DEAL

S.O.S pads work awesome on white plastic.

Posted by: kabd69667

I don't know this is just somthign that came to my messed up mind, but what about bleech?

Posted by: RIZZO

that's what i was thinking........bleech..........but not sure.
did anyone ever try this on white plastic ?????

Posted by: DEAL

Bleech will work , a few of my friends did it on their old yamaha dirtbikes.

Posted by: Regulator 250X

Go to lrdperformance.com and check out their racing tips, it has a great tip on how to clean plastic, especially white. Check it out, it also has some other cool tips.

Posted by:

i used comet on my bike. worked alright

Posted by: GNCCer

For my white plastic I clean it with a rough material sponge with OXY clean mixed in with the water.

Posted by: DESDAK4

I use 2001 wheel cleaner with a rough cloth on my wifes trailblazer. That stuff seems too work good. Then I shine them up with Son of a Gun

Posted by: RdingManiac420

If I where you I wouldnt rub it with anything abrasive. I sanded my 250 and blasters white plastics then everytime it got dirty the dirt got stuck down in the little scratches. I would just try to polish it with some type of chemical. I personaly like mop 'n' glo. You can find it at your supermarket in the floor cleaning isle.