[the best banshee pipes] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

the best banshee pipes
(Click here to view the original thread with full colors/images)

Posted by: igota416

The best pipes for a yamaha banshee is the FMF PHATTIES

Posted by: Jersey450R

no they are not, the toomey t5's are the best out for the banshees so far.

Posted by: ledofthezep

Neither of you have a clue.

My pipes are better than your pipes...

Jesus people.

Posted by: SheeRider

http://smilies.jeeptalk.org/contrib/edoom/iamwithstupid.gif

I took both my pipes off it gives you 15hp http://www.bansheehq.com/forums/style_emoticons/default/yankyank.gif

Posted by: pro_stock_1000

the best pipes.... to me ....was the toomey T-5 but now they got the toomey T-6...and thats what im going to put on mine.....they say thats the best one,...

Posted by: badass250r

if u go over to banshee hq there all gonna tell u ROCKET pipes are the best

Posted by: joedirtay

any one know how much oil does a banshee hold

Posted by: SheeRider

quote:
Originally posted by joedirtay
any one know how much oil does a banshee hold

the banshee is not oil injected...t5's are better with ported motors than the t6's

Posted by: zephead400ex

quote:
Originally posted by joedirtay
any one know how much oil does a banshee hold

It's a 2 stroke, you have to mix your oil and gas.

Posted by: ledofthezep

quote:
Originally posted by joedirtay
any one know how much oil does a banshee hold

In the case, manual states 1.5qts; I run between 1.5-2qts.

Mix my gas 40:1 with castor927 & 93oct.

On the pipes...the ignorance of some of these posts are cracking me up.

Pro_Stock...if you plan on leaving your banshee's motor in stock trim other than pipes/jet/filter, then the TR6's are the way to go...if you have any motor mods, then T5's are still your best bet. That's what Toomey claims anyway, don't believe me?--ask them yourself.

Posted by: pro_stock_1000

Ledofthezep!!!!thanks for the advise....this summer i will only put pipes and Vforce....i do a lot of trail and fooling around in pits..so i think the best pipes would be the TR-6 right ????

Posted by: Kilabanshee

CPI inframe drag pipes.

Posted by: SheeRider

quote:
Originally posted by pro_stock_1000
Ledofthezep!!!!thanks for the advise....this summer i will only put pipes and Vforce....i do a lot of trail and fooling around in pits..so i think the best pipes would be the TR-6 right ????

toomeys are top end pipes...if you want an all around pipe go with fmf FATTYS not PHATTIES

Posted by: ledofthezep

quote:
Originally posted by pro_stock_1000
Ledofthezep!!!!thanks for the advise....this summer i will only put pipes and Vforce....i do a lot of trail and fooling around in pits..so i think the best pipes would be the TR-6 right ????

No problem...depends on what you're planning on doing with your quad. I have no complaints on my ProCircuits, they suit my style good. I will never say that any pipes are the best...if you plan on leaving your banshee's motor stock, then according to toomey, the TR6's would be your best bet. If you plan on doing lots of mods to the motor, they say T5's will perform better. If I had the money, I'd be getting som PT mids; have heard very good things about them and would like to try them out for myself. Fatty's wouldn't be a bad choice either--it's up to you man.

Posted by: pro_stock_1000

thanks.....