[300ex Ignition key moved to headlight?] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

300ex Ignition key moved to headlight?
(Click here to view the original thread with full colors/images)

Posted by: wrk24wheel

Has anyone tried to put the ignition key in the headlight holder? I have not tried to disassemble mine yet and was wondering if someone else had attempted this first. Is there enough room?

Posted by: rollie

i dont think there enough room when i took my light off it the light takes up alot of it just drill a hole in the side plastic and put the ignition in there then sacure it with some tie wraps

Posted by: Locknload82

I did this to my sons 300ex. I removed the green light for the neutral indicator and reinstalled it on the other side of the light behind the red reverse indicator light. I then drilled out the hole where the green light was and installed the key switch in that hole. You need to drill the hole out to a 1" diameter to mount the key switch in.

You cannot mount the key switch in the middle of the headlight cover. There is not enough room there, the back of the light will hit it.

I thought about moving it to the side plastic under the handlebars, Thought it would be handier on top of the light, and worried he would hit it with his knee if it was mounted on the side.

Posted by: wrk24wheel

Thanks I like that idea. There really is no need for the reverse light.