[tow in, tow out; wax on, wax off] - ATV Riders Forums - Honda, Yamaha, Suzuki, Kawasaki, Polaris, CanAm, Arctic Cat, Kymco ATVs

Pages:1

tow in, tow out; wax on, wax off
(Click here to view the original thread with full colors/images)

Posted by: chad cavagnaro

put maxxis razor 2's, 22 inch and heavy duty tie rods and cannot get alignment quite write.... does anyone have specs or an answer on how to get these back. my front end is a little squerelly i have them towed out about 1/2 inch, also tried what i thought was dead streight......help please.

Posted by: Doibugu2

The front is supposed to be closer to the frame vs the rear of the tire.

The top of the tire is supposed to be closer to the frame the the bottom.

Go the LSR's site, (don't have the url) they have pretty good instructions of how to set up the front end.

Posted by: Cole Trane

Here ya go!

http://www.exriders.com/vbb/showthr...&threadid=86860

Posted by: chad cavagnaro

this has helped, i think i know my problem now.
thanks, this is chad signing out.....see ya!

Posted by: KY Woods Rider

The factory specs on a 400EX call for 17mm of toe-in, but anything between 2mm and 32mm of toe-in is considered within spec.

Personally, I like my EX set at 10mm of toe-in, and I always seem to like similar settings on almost any sport quad.